Siemens Simatic IPC520A, Руководство по эксплуатации

Страница: 33 / 80

SIMATIC IPC520A
Operating Instructions, 11/2021, A5E51366325-AA
33
Installing OS and SDK components
4
4.1 Flashing the Ubuntu Operating System
Follow these steps to flash the Ubuntu Operating System:
Note
Operating System is not installed in new device.
1. Install NVIDIA SDK Manager on a local PC. For detailed installation procedures, refer to the
NVIDIA website ( https://docs.nvidia.com/jetson/jetpack/install-jetpack/index.html ).
2. Set the IPC520A to Force Recovery Mode (RCM).
– 2.1 Switch off the IPC520A.
– 2.2 Connect the IPC520A to local PC through the micro USB cable.
– 2.3 Keep pressing the Reset button.
– 2.4 Switch on the IPC520A and wait for more than 3 seconds, then release the Reset
button.
– 2.5 Check whether the IPC520A is entering the RCM: Enter the commend “ lsusb ”, then
the output returns should be like below:
Bus <xxx> Device <xxx>: ID 0955: <7e19> Nvidia Corp
Otherwise, redo the step 2.
3. Start up NVIDIA SDK Manager, and register an NVIDIA account to log in to NVIDIA SDK
Manager.