Siemens SIMATIC IPC477E Скачать руководство пользователя страница 137

Страница: 137 / 190

Technical information

8.4 Technical specifications

SIMATIC IPC477E
Operating Instructions, 11/2020, A5E37455003-AF

137

8.4.6

Restoring the delivery state

You can restore the original factory software using the Restore function. The USB stick

contains the necessary images and tools for transferring the factory software to the hard

disk/SSD or memory card of your PC. The following options are available for restoring

software:
•

Restore the entire hard disk / SSD or memory card with drive C: (system) and drive D: Use

the "Restore entire hard disk" option.

•

Restore drive C: only This allows you to retain any user data on drive D: Use the "Restore

system partition only" option.

NOTICE
Data are deleted

When you select the "Restore entire hard disk" option, all data, user settings and

authorizations or license keys on the hard disk are lost. The hard disk is reset to the delivery

state with partitions "C:" and "D:".
If the "Restore system partition only" option is set, all files on drive C: (System) are deleted.

All data, user settings and existing authorizations or license keys on drive "C:" will be lost.

Drive "C:" on the hard drive is completely erased, reformatted and the original software is

written to it.

Procedure

Note

The "USB Boot" option has to be set to "Enabled" in the BIOS menu "Boot" so that the device

can boot from the USB stick.

Connect the USB stick to the device.

Restart the device.

Press <ESC> when the following BIOS message appears:

Press Esc for Boot Options

The BIOS selection menu is displayed when initialization is completed.

To boot from the USB stick, select the Boot Manager.

Select the USB stick in the Boot Manager and confirm the entry.

Select the Restore function and confirm the entry.

Follow the on-screen instructions.

Содержание SIMATIC IPC477E































































































































































































Результаты поиска

Содержание SIMATIC IPC477E

Отзывы:

Похожие инструкции для SIMATIC IPC477E

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC477E, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC477E

Отзывы:

Похожие инструкции для SIMATIC IPC477E

Бренды по названию

Популярные бренды