Siemens SIMATIC IPC477D Скачать руководство пользователя

Страница: 130 / 292

Operating the device and device functions

5.6 Extended device functions

SIMATIC IPC477D, IPC477D PRO

130

Operating Instructions, 11/2016, A5E31347228-AF

5.6.5

Active Management Technology (AMT)

AMT (Active Management Technology) is technology for the remote maintenance of

computers (simply called AMT-PC in the remainder of the document) and it includes the

following functions:

●

Keyboard Video Mouse( KVM) Redirection: Using KVM that is integrated in the AMT

hardware you access the AMT PC remotely. With KVM, you can also control AMT PCs

that have no operating system or a defective operating system. A KVM remote session is

always possible with the KVM server integrated in the firmware. This means you can

restart the PC and change the BIOS setup remotely.

●

Remote power management: AMT PCs can be turned on and off and restarted from

another PC.

●

SOL (Serial over LAN): Redirection of the data of a serial interface to the network. The

main use of the function is text-based remote control of an AMT PC using a console.

●

IDE redirection: An ISO file on the help desk PC can be mounted on the AMT PC and

used as a DVD drive.
An ISO file contains a memory image of the content of a CD or DVD structured in the

ISO 9660 format.

●

Remote reboot: An AMT PC can be booted from a bootable ISO file made available by

another PC.

SIMATIC IPC Remote Manager

The "SIMATIC IPC Remote Manager" software is available for utilization of the AMT

functions with SIMATIC IPCs. The software can be ordered from the Siemens online

ordering system. For detailed information about "SIMATIC IPC Remote Manager", refer to

the corresponding product documentation: SIMATIC IPC Remote Manager

(

http://support.automation.siemens.com/WW/view/en/48707158

)

Typical areas of application and functions of the SIMATIC IPC Remote Manager:

●

Remote maintenance of SIMATIC IPC with AMT, for example for service purposes in the

case of a defective operating system or for adapting BIOS settings.

●

Diagnostics without on-site use

●

Convenient service: Access to AMT clients, such as headless systems, without additional

hardware

●

Resource management

Содержание SIMATIC IPC477D





































































































































































































































































































Результаты поиска

Содержание SIMATIC IPC477D

Отзывы:

Похожие инструкции для SIMATIC IPC477D

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC477D, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC477D

Отзывы:

Похожие инструкции для SIMATIC IPC477D

Бренды по названию

Популярные бренды