manualshive.com logo in svg

Siemens SIMATIC IPC377E, Руководство по эксплуатации

Поделиться
Скачать
Siemens SIMATIC IPC377E Скачать руководство пользователя страница 58

Maintaining and repairing the device 

 

7.6 Installing the software 

 

SIMATIC IPC377E 

58

 

Operating Instructions, 2017/05, A5E40965249-AA 

6.

 

Select the disk you want to restore. 

 

 

①

 

Format and restore the system to the selected partition. 

②

 

Format all partitions on the selected hard disk, but the partitions size are not changed. The 

system is restored to the selected partition. 

③

 

The selected hard disk is repartitioned and reformatted to the factory setting. The operating 

system is restored to the first partition.  
Note: The selected hard disk must be the same type as the factory-shipped hard disk.  

 

 

 

 

NOTICE 
Risk of data lost 
If "Format selected Partition" is set, all data on the selected drive (system partition) will 

be deleted. All data, user settings and all authorizations or license keys on the selected 

drive will be lost! All data on the selected drive will be completely deleted, reformatted 

and overwritten with the original factory software.  
If "Format selected HardDisk and Restore to Factory Setting" is set, all data, user 

settings, authorizations or license keys will be lost on the entire hard disk setting. 

 

7.

 

Click OK to reboot the device in prompt window after the restoring finished. 

Содержание SIMATIC IPC377E





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды