Siemens SIMATIC IPC377E, Руководство по эксплуатации

Страница: 3 / 124

SIMATIC IPC377E
Operating Instructions, 2017/05, A5E40965249-AA
3
Preface
These operating instructions contain all the information you need for commissioning and
operating the SIMATIC IPC377E.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of validity of this documentation
These operating instructions are valid for all versions of the SIMATIC IPC377E.
Scope of this documentation
The documentation for SIMATIC IPC377E consists of:
● Product information, e.g. "Important notes on your device"
● Quick Install Guide SIMATIC IPC377E
● SIMATIC IPC377E operating instructions in English
The PDF version of the documentation is supplied with the device on the
"Documentation and Drivers" CD/DVD.
Conventions
The terms "PC" or "device" are used in place of the product name SIMATIC IPC377E in
these operating instructions.
In these operating instructions, "Windows Embedded Standard" is also used as a standard
term for "Windows Embedded Standard 7". "Windows 7" is used as an abbreviation for
"Windows 7 Ultimate".
History
The following earlier release versions of these operating instructions have been published:
Edition Comment
05/2017 First edition