Siemens SIMATIC IPC347E, Руководство по эксплуатации

Страница: 70 / 148

Technical specifications
7.1 Certificates and approvals
SIMATIC IPC347E
70
Operating Instructions, 09/2018, A5E41134132-AE
2014/35/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits; Official Journal
of the EU L96, 29/03/2014, p. 357–374 (from 20.04.2016)
EMC EN 61000-3-2:2006 + A1:2009 + A2:2009, EN 61000-3-3:2013,
EN 61000-6-4:2007 + A1:2011, EN 61000-6-2:2005
LVD EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Software license agreements
If the device is supplied with installed software, observe the corresponding license
agreements.
UL approval
The following approval is available for the device:
● Underwriters Laboratories (UL) to standard UL 60950-1
● Underwriters Laboratories (UL) in accordance with Standard UL61010-1 and
UL61010-2-201 (IND.CONT.EQ), File E472609
● Canadian National Standard CAN/CSA-C22.2 No. 60950-1-07 (I.T.E)
● Canadian National Standard CAN/CSA No.61010-1-12 and CAN/CSA C22.2
No.61010-2-201
FCC and Canada
USA
Federal Communications
Commission
Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Shielded cables Shielded cables must be used with this equipment to maintain compliance
with FCC regulations.
Modifications Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Conditions of operations This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CANADA
Canadian notice
This Class A digital apparatus complies with Canadian ICES-003.
Avis Canadian Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.