Siemens SIMATIC IPC227G Скачать руководство пользователя страница 44

Страница: 44 / 106

Expanding and assigning parameters to the device

5.3 Installing and removing M.2 NVMe/ SATA SSD

SIMATIC IPC227G

Operating Instructions, 06/2021, A5E50059933-AA

Remove the COM interface and its jumpers on the moth-

erboard.

Follow above steps to install the M.2 Module with an ad-

ditional interface-card on the X100 or X101 interfaces

slot.

Note:

The cable length of the M.2 Module should not be

shorter than 100 mm and no longer than 200 mm.

Secure the additional interface-card in the position of the

COM interface with screws.

Procedure - Removing the M.2 Module

Follow the above steps in reverse order to remove the M.2 Module.

5.3

Installing and removing M.2 NVMe/ SATA SSD

The device has a slot for M.2 NVMe or SATA SSD on the side of the interface panel.

Requirement

•

The device is disconnected from the power supply.

•

A M.2 NVMe/SATA SSD that is approved for industrial applications.

•

A T10 screwdriver

Содержание SIMATIC IPC227G











































































































Результаты поиска

Содержание SIMATIC IPC227G

Отзывы:

Siemens SIMATIC IPC227G, Руководство по эксплуатации, Страница: 44 / 106

Результаты поиска

Содержание SIMATIC IPC227G

Отзывы: