Siemens simatic ipc227e Скачать руководство пользователя страница 85

Страница: 85 / 156

SIMATIC IPC227E
Operating Instructions, 11/2016, A5E35782395-AB

Technical specifications

7.1

Certificates and approvals

The device meets the guidelines listed in the following sections.

EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:

EC declaration of conformity, UL approval for Canada/USA

(

http://support.automation.siemens.com/WW/view/en/48958203

DIN ISO 9001 certificate

The Siemens quality management system for all production processes (development,

production and sales) meets the requirements of DIN ISO 9001:2000.
This has been certified by DQS (the German society for the certification of quality

management systems).
Certificate registration no. DE-000656 QM08

Software license agreements

If the device is supplied with preinstalled software, you must observe the corresponding

license agreements.

UL approval

The following approvals are available for the device:

●

Underwriters Laboratories (UL) in accordance with Standard UL 60950-1 Second Edition,

File E115352 (I.T.E)

●

Underwriters Laboratories (UL) in accordance with Standard UL508 (IND.CONT.EQ),

File E85972

●

Canadian National Standard CAN/CSA-C22.2 No. 60950-1-07

●

Canadian National Standard CAN/CSA-C22.2 No. 142

Содержание simatic ipc227e





























































































































































Результаты поиска

Содержание simatic ipc227e

Отзывы:

Siemens simatic ipc227e, Руководство по эксплуатации, Страница: 85 / 156

Результаты поиска

Содержание simatic ipc227e

Отзывы: