Siemens simatic ipc227e Скачать руководство пользователя страница 37

Страница: 37 / 156

Installing and connecting the device

3.2 Mounting the device

SIMATIC IPC227E
Operating Instructions, 11/2016, A5E35782395-AB

3.2.4

Upright mounting

Upright mounting is suitable for vertical mounting of the device. The corresponding mounting

bracket allows mounting that requires less space than standard rail mounting and wall

mounting.

Requirement

●

Two mounting brackets
The mounting brackets are available in two versions - for the basic device version and for

the PCIe device versions. The mounting bracket and four screws are included in the

order variant "Upright mounting".

●

A T20 screwdriver

●

Four anchors and four screws

Procedure for mounting

Place the mounting bracket on

the rear of the device.

Secure the mounting bracket

with 2 screws.

Place the device with the mount-

ing brackets onto the mounting

surface.

Mark the fixing holes.

Drill the fixing holes.

Insert the anchors in the drilled

holes.

Screw on the device.

Содержание simatic ipc227e





























































































































































Результаты поиска

Содержание simatic ipc227e

Отзывы:

Siemens simatic ipc227e, Руководство по эксплуатации, Страница: 37 / 156

Результаты поиска

Содержание simatic ipc227e

Отзывы: