Standards and approvals
10.2 UKCA marking
SIMATIC IPC BX-39A
90
Operating Instructions, 07/2022, A5E50715883-AA
10.2
UKCA marking
The device complies with the designated British standards (BS) for electrical equipment
published in the official consolidated list of the British Government. The device meets the
requirements and protection targets of the following regulations and related amendments:
•
Electromagnetic Compatibility Regulations 2016 (EMC)
•
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres
Regulations 2016 (Explosion Protection)
1
•
Regulations on the restriction of the use of certain hazardous substances in electrical and
electronic equipment 2012 (RoHS)
1
: Marking on nameplate, if applicable
UKCA Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
•
Certificate Box PC
http://support.automation.siemens.com/WW/view/en/10805671/134200
10.3
DIN ISO 9001 certificate and software license agreements
ISO 9001 certificate
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001.
This has been certified by DQS (the German society for the certification of quality
management systems).
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
10.4
UL approval
The following approvals are available for the device:
•
Underwriters Laboratories (UL) according to Standard UL 61010-2-201 Second Edition,
File E85972 (PROG.CNTLR.)
•
Canadian National Standard CAN/CSA-C22.2 No. 61010-2-201 Second Edition
