Siemens SIMATIC IPC BX-39A Скачать руководство пользователя

Страница: 18 / 115

Product description

1.6 Accessories and spare parts

SIMATIC IPC BX-39A

Operating Instructions, 07/2022, A5E50715883-AA

1.6

Accessories and spare parts

1.6.1

Hardware accessories

Accessories from Siemens are available for your device that are not included in the scope of

delivery.

Obtaining accessories from the SIEMENS Industry Mall

On the Internet, go to Industry Mall (

https://mall.industry.siemens.com

Select your user language.

Go to your device in the product catalog (tree structure on left):
"Automation technology > PC-based Automation > Industrial PC > Box PC > ..."

In the tree structure on the left, click on: SIMATIC IPC BX-39A.

Select the "Accessories" tab in the display area.

SIEMENS spare parts services

Information on ordering, the provision and delivery of spare parts can be found under

"Industry Online Support: Spare parts services

(

http://support.automation.siemens.com/WW/view/en/16611927

)".

1.6.2

Software accessories

The following software products, among others, can be additionally ordered for your device:

Software

Description

SIMATIC IPC Image & Partition Creator SIMATIC IPC Image & Partition Creator enables easy backup

and quick recovery of individual data and files, complete hard

disks and other data storage media.

The intuitive user interface provides disk and partition man-

agement functions.

SIMATIC IPC DiagMonitor

SIMATIC IPC DiagMonitor also offers, in addition to local moni-

toring functions, options to remotely monitor IPCs, to com-

municate with other systems, to alarm worldwide and to

create proprietary monitoring applications.

Further information on the software products and references to the online catalog and

ordering system (Industry Mall (

https://mall.industry.siemens.com

)) can be found on the

SIMATIC IPC software (

http://www.automation.siemens.com/mcms/pc-based-

automation/en/industrial-pc/expansion_components_accessories

) homepage.

Содержание SIMATIC IPC BX-39A




















































































































Результаты поиска

Содержание SIMATIC IPC BX-39A

Отзывы:

Похожие инструкции для SIMATIC IPC BX-39A

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC BX-39A, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC BX-39A

Отзывы:

Похожие инструкции для SIMATIC IPC BX-39A

Бренды по названию

Популярные бренды