Siemens SIMATIC Ident CB Gate Скачать руководство пользователя страница 48

Страница: 48 / 70

Operation via the CB Gate user interface

8.2 Menu items

SIMATIC Ident CB Gate

Operating Instructions, 08/2022, C79000-G8976-C671-01

8.2.3

"Black list" menu item

The "Black list" menu item is divided into the following areas:
•

Settings

•

Black listed transponders in PLC

Figure 8-4

"Black list" menu item

Settings

You can enable or disable the Black list filter algorithm in the "Settings" area. Note that the

algorithm can only be enabled/disabled when the CB Gate is disabled ("Home > Enable

Tiregate > Off").

Table 8- 6

Description of the "Settings" parameters

Parameter

Description

Disable Black list

If the function is enabled, transponders that have already been processed are

hidden in a targeted manner.

Note: The "Black List" is enabled in the delivery state. This ensures that

transponders are not read multiple times in succession. A transponder is only

detected again if at least five other transponders have been read between

the first and the following read operation.

The recommendation is to disable the Black list for test purposes only.

Black listed transponders in PLC

The five transponders currently in the Black list are shown in the "Black listed transponders in

PLC" area. They are filtered out in the next read operations.
You can delete all entries from the list with the "Delete" button.

Содержание SIMATIC Ident CB Gate







































































Результаты поиска

Содержание SIMATIC Ident CB Gate

Отзывы:

Похожие инструкции для SIMATIC Ident CB Gate

Бренды по названию

Популярные бренды

Siemens SIMATIC Ident CB Gate, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC Ident CB Gate

Отзывы:

Похожие инструкции для SIMATIC Ident CB Gate

Бренды по названию

Популярные бренды