Siemens SIMATIC HMI TP1000F Mobile RO Скачать руководство пользователя страница 92

Страница: 92 / 196

Parameterizing the Mobile Panel

5.7 General settings

TP1000F Mobile RO

Operating Instructions, 08/2017, A5E39831415-AA

5.7.4

Setting the screen saver

You can set the following time intervals in the Control Panel:

●

Automatic activation of the screen saver

●

Automatic reduction in the display backlighting

The HMI device exhibits the following behavior based on the settings:

●

The screen saver is automatically activated if the HMI device is not operated within the

specified period of time.

●

Touching the touch screen switches off the screen saver. If you touch a button at the

same time, the function assigned to the button is not executed. In addition, the reduction

of the backlighting according to the settings of the screen saver is canceled.

NOTICE
Activating the screen saver
Display content that is not changed for a long period can remain dimly visible in the

background for a long time. This effect is reversible when you use a screen saver with

moving image. Therefore, activate the screen saver of the type "Standard

(Flying Windows)".

Requirement

The Control Panel is open.

Содержание SIMATIC HMI TP1000F Mobile RO





































































































































































































Результаты поиска

Содержание SIMATIC HMI TP1000F Mobile RO

Отзывы:

Siemens SIMATIC HMI TP1000F Mobile RO, Руководство по эксплуатации, Страница: 92 / 196

Результаты поиска

Содержание SIMATIC HMI TP1000F Mobile RO

Отзывы: