Siemens SIMATIC HMI series, Системное руководство

Страница: 43 / 226

The path length of the drive name, file folder and setup files may be no longer than 255
characters.
Record function
The Record function supports multiple installation on different computers with identical options.
During setup, the Record function records the settings and creates a "Ra_Auto.ini" installation
file which supports you during installation.
While in the past you had to navigate through all setup dialogs for each installation, all you
have to do now is start setup with the "Ra_Auto.ini" control file.
Conditions for using the record function
Central installation is only possible for the respective setup version that is available at the time.
A central installation of WinCC has no effect on the subsequent installation of updates or
options.
Overview of the procedure
The following steps are required for a central installation:
1. Call the Record function and create the "Ra_Auto.ini" control file.
2. Start central installation.
1.7.6.2 Calling Record function
You use the Record function to create the "Ra_Auto.ini" control file which includes all
information for the central installation.
Dependency on operating system
Run the central installation for each operating system version separately.
The control file can only be executed on PCs on which the same operating system version is
running. During installation of WinCC, Microsoft updates are installed, for example, which
depend on the installed operating system.
Requirement
● You need administrator rights on your PC.
WinCC Installation Notes
1.7 Installing WinCC
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
43