Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 84 / 132

Configuring the server
6.3 Sm@rtServer
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
84
Operating Instructions, 04/2013, A5E03474888-02
6.3 Sm@rtServer
Introduction
With the SIMATIC WinCC Sm@rtServer option, HMI devices communicate with each other
via PROFINET. The WinCC option thus enables client/server configurations for distributed
operator stations in a plant.
If the SIMATIC WinCC Sm@rtServer option is installed on an HMI device, for example, on
an MP 377 or Comfort Panel, the Industrial Thin Client can access the running project via
Ethernet. In this case, the HMI device is the server. The Industrial Thin Client is a client.
A description of the Sm@rtServer configuration can be found in the online help of WinCC or
in the "WinCC Getting Started Options" manual.
Sm@rtServer-capable HMI devices
The SIMATIC WinCC Sm@rtServer option can be used for all HMI devices as of device
class 177B PN. You can refer to the documentation of your HMI device regarding the
number of clients that are possible with an HMI device that is used as a server.
Licensing
You do not require any licenses on the Industrial Thin Client in order to access an HMI
device. The licenses are included in the SIMATIC WinCC Sm@rtServer option. The
Sm@rtServer license must be installed on the HMI device you are accessing with the Thin
Client.
See also
Requirements (Page 16)