Siemens SIMATIC HMI Industrial Thin Client ITC1200, Руководство по эксплуатации

Страница: 59 / 132

Assigning device parameters
5.3 Configuration settings of the device
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
59
To edit the configuration settings, follow these steps:
1.
Move the blue circle (slider) "Logon" in the toolbar to the right.
2. Enter the administrator password.
3. Click the "Logon" button to close the dialog.
You are logged on as administrator.
Logging off as an administrator
To protect the configuration settings from unauthorized access from the outside, follow these
steps:
1.
Move the blue circle (slider) "Logon" in the toolbar to the left.
You are logged off as administrator.
Changing the administrator password
The administrator password can be changed in the "Configuration > Passwords" Start menu.
Note
Misuse
The factory-set administrator password for all devices is "admin". This means that
unauthorized persons have free access to the configuration settings.
After initial commissioning or restoring of the factory settings, you should log on with "admin"
and assign a new administrator password.
1. Touch the "Change administrator password" button. The "Change password" dialog
opens.
2. Enter the old password.
3. Assign a new password.
The length of the administrator password is restricted to a maximum of 30 characters. It is
possible to enter a blank administrator password, but not a space as the administrator
password.
4. Repeat the new password.
5. If you select "Hide passwords", the password is no longer shown when you log on.
Forgetting the administrator password
If you have forgotten the administrator password, you must revert to the default administrator
password. Restore the factory settings for this.
Note
Losing the current configuration settings
When restoring to factory settings, the current configuration file is overwritten.
Once the factory settings have been restored, the administrator password "admin" is then
valid again. For security reasons it is best to enter a new administrator password.