manualshive.com logo in svg

Siemens SIMATIC HawkEye 1600T Series, Руководство пользователя

Поделиться
Скачать
Siemens SIMATIC HawkEye 1600T Series Скачать руководство пользователя страница 10

Preface

x

SIMATIC HawkEye™ 1600T Smart Camera Guide

Rev. 1E, Nov 2007

Training Center

SITRAIN™ Siemens Training

Siemens Training (SITRAIN) offers a range of courses on Machine Vision and 
Symbology Reading. Training classes are conducted in Norcross, Georgia and at 
locations across the USA. SITRAIN also offers courses on PLC, Drives, 
Controls, HMI, NET, Process Control, Analyzers and Instrumentation, Electrical 
and Power, Safety and more. Details of current SITRAIN course offerings can be 
viewed at http://www.automation.usa.siemens.com/sitrain/

For training in Germany, see: 
http://www.sitrain.siemens.com/html_76/f_11_sensors.html

To view Machine Vision and Symbology course offerings, please click on the 
“Automation” link in the middle of the page and then the “Vision and Sensors” 
link from the list that is presented. Alternatively, please contact the Siemens 
Training Registrar at (800) 241-4453. 

Technical Support

How to reach technical support for all A&D products

•

With the Support Request form on the Web:
http://www.siemens.de/automation/support-request

•

Telephone: + 49 180 5050 222

•

Telephone: 800 333-7421 (USA)

•

Fax: + 49 180 5050 223

Further information about our technical support is available in the Internet at 
http://www.siemens.com/automation/service

Service & Support on the Internet

The Siemens Service & Support team provides you with comprehensive 
additional information on SIMATIC products in its online Internet services.

http://www.siemens.com/automation/service&support

Содержание SIMATIC HawkEye 1600T Series
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды