manualshive.com logo in svg

Siemens SIMATIC FM 453, Руководство пользователя

Поделиться
Скачать
Siemens SIMATIC FM 453 Скачать руководство пользователя страница 66

5-4

FM 453 Servo Drive / Step Drive Positioning Module

C79000-G7076-C453-01

7. By clicking the tabs in this window (General, Addresses and Basic Pa-

rameters), you can

–

Name the FM 353

–

Change the address of the FM 353

–

configure the interrupts.

Note:

Further operation of the FM 453 is not possible with the CPU in the STOP
state.

Click the Parameters button to call up the screen for setting the parameters.

Fig. 5-3

Overview Display for Parameterization

You can return to this display at any point during parameterization by select-
ing the menu View 

"

 Overview.

The FM 453 module for universal positioning is parameterized in each chan-
nel by way of parameter DBs that reside in memory on the module. Here a
key function is performed by the “Machine data” data block (DB-MD), since
it is always needed, regardless of what technological function the module
performs. All other parameter DBs are only needed as a function of the
technology involved.

You can now set the parameters of your module. This chapter gives you an
overview of the parameters that can be set.

You can use the mouse to change the size of the window for entering the pa-
rameter data and the size of the overview display.

Defining Parameters of the FM 453

Содержание SIMATIC FM 453





























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды