Siemens SIMATIC FM 453, Руководство пользователя, Страница: 29 / 380

3-1
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Installing and Removing the FM 453
The FM 453 positioning module can be installed, in the same manner as a
signal module, in a central controller or in an expansion unit (EUs 1 to 6).
The options for the mechanical set-up and its configuration are described in
the manual S7-400/M7-400 Programmable Controller; Hardware and Instal-
lation.
There are important rules which you must follow when integrating an FM
453 in the S7-400 PLC in a plant or system.
These rules and specifications are described in the manual S7-400/M7-400
Programmable Controller, Hardware and Installation.
A module can be replaced during operation of the programmable controller.
In Section You Will Find On Page
3.1 Installing the FM 453 3-2
3.2 Removing the FM 453 3-3
3.3 Replacing Modules 3-3
Overview
Mechanical Set-Up
Important Safety
Rules
Module Replace-
ment
Chapter
Overview
3