Siemens SIMATIC FM 452, Руководство пользователя

Страница: 181 / 210

Data Blocks/Error Lists
C-7
FM 452 Electronic Cam Controller
C79000-G7076-C452-04
Table C-1 Content of the Channel DB
Address Comment Initial
Value Type Name
Error Bits for Read Jobs
49.1 MDRD_ERR BOOL FALSE 1 = error in “read machine data” job
49.2 CAM1RD_ERR BOOL FALSE 1 = error in “read cam data 1” job
49.3 CAM2RD_ERR BOOL FALSE 1 = error in “read cam data 2” job
49.4 CAM3RD_ERR BOOL FALSE 1 = error in “read cam data 3” job
49.5 CAM4RD_ERR BOOL FALSE 1 = error in “read cam data 4” job
49.6 CAM5RD_ERR BOOL FALSE 1 = error in “read cam data 5” job
9.7 CAM6RD_ERR BOOL FALSE 1 = error in “read cam data 6” job
50.0 CAM7RD_ERR BOOL FALSE 1 = error in “read cam data 7” job
50.1 CAM8RD_ERR BOOL FALSE 1 = error in “read cam data 8” job
50.2 MSRRD_ERR BOOL FALSE 1 = error in “read measured values” job
50.3 CNTTRC_ERR BOOL FALSE 1 = error in “read count values of counter
cam tracks” job
50.4 ACTPOS_ERR BOOL FALSE 1 = error in “read position and track data”
job
50.5 ENCVAL_ERR BOOL FALSE 1 = error in “read current encoder value”
job
50.6 CAMOUT_ERR BOOL FALSE 1 = error in “read cam and track data” job
Job Management for FC CAM_CTRL
52.0 JOB_ERR INT 0 Communication error
54.0 JOBBUSY BOOL FALSE 1 = at least one job active
54.1 JOBRESET BOOL FALSE 1 = reset all error and done bits
Job Management for FC CAM_MSRM
56.0 JOB_ERR_M INT 0 Communication error
58.0 JOBBUSY_M BOOL FALSE 1 = job active
Data for “Zero Offset” Job
86.0 ZOFF DINT L#0 Zero Offset
Data for “Set Actual Value” Job
90.0 AVAL DINT L#0 Coordinate for “set actual value”
Data for “Set Actual Value on-the-Fly” Job
94.0 FVAL DINT L#0 Coordinate for “set actual value on-the-fly”
Data for “Set Reference Point” job
98.0 REFPT DINT L#0 Coordinate for “set reference point”
Data for “Change Cam Edges” Job
102.0 CAM_NO INT 0 Cam number
104.0 CAM_START DINT L#0 Cam start