Siemens SIMATIC Field PG P4, Руководство пользователя

Страница: 108 / 144

Reinstallation of the Software
8-4
SIMATIC Field PG P4 Manual
A5E00180080-04
8.2.2 Creating Partitions under Windows NT
After installing a new hard disk it is necessary to create partitions when they
partitions have errors or need to be changed.
Caution
By deleting or creating partitions all saved data is lost on the hard disk. All drives
on the hard disk will be erased.
The hard disk is delivered with the following installed (only for versions delivered
with Windows NT):
– a partition of with the FAT16 file system with 2045 Mbytes,
– a partition of with the NTFS file system.
To restore the partitions to their original condition, please do the following:
Primary Partition
1. Insert the Recovery CD into your CD-ROM drive and start the device.
2. To boot from the Recovery CD, press the ESC key when the BIOS message:
Press <F2> to enter Setup
is displayed. On the completion of initialization, a ”Boot Menu” appears.
3. Select the ”CD-ROM Drive” with the cursor.
4. When “Microsoft Windows 98 Startup Menu” is displayed, select
“2. Boot for FDISK, FORMAT or Windows NT Setup”.
5. Start the Microsoft Windows 98 hard disk configuration program with
”A:\>FDisk” (A is the CD-ROM drive).
Select the dialog box for enable large disk support for installing a FAT16
partition “activate support (Y/N)...? [ N ] ” for No.
6. Create a primary DOS-Partition of 2045 MB for a FAT 16 file system. Answer
the question “Do you wish to use the maximum available size...” for a 2045 MB
FAT16 partition with [Y] for Yes.
7. In order to continue with the next step “Create a Save to Disk Partition” the
primary partition needs to be formatted.
Use the Recovery CD to boot as described in steps 1 to 3 above and then
format drive C: with the program “Format”.
Type: ”A:\>Format C:”.
The creation of NTFS partitions is done under the Windows NT setup program.
Starting the Windows NT setup is described in chapter 8.4.