Siemens SIMATIC Field PG M6 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 120

background image

Installing and connecting the device

4.3 Connecting the device

SIMATIC Field PG M6
Operating Instructions, 12/2018, A5E43198909-AA

33

4.3

Connecting the device

4.3.1

Connecting the power supply

To be noted before you connect the device

Note
The external power unit supplies power to the Field PG in mains operation with 120 V and

230 V power supply networks. The voltage range is set automatically.

WARNING

Risk of lightning strikes
Lightning may enter the mains cables and data transmission cables and jump to a person.
Death, serious injury and burns can be caused by lightning strikes.
Take the following precautions:

•

Pull out the power plug in good time when a thunderstorm is approaching.

•

Do not touch mains cables and data transmission cables during a thunderstorm.

•

Keep sufficient distance from electric cables, distributors, systems, etc.

WARNING

Operation only in grounded power supply systems
The device is designed only to be used in grounded power supply systems (TN systems to

VDE 0100, part 300, or IEC 60364-3).
It must not be used in ungrounded, or impedance-grounded power systems (IT systems).

WARNING

Danger of damage to the device or destruction of the battery
Only use the supplied battery or an original spare part. Information on original spare parts

for Field PGs is available in section Accessories (Page 24).

WARNING

Risk of fire and electric shock
The On/Off button does not completely isolate the device from the power supply. If the

device is switched off with the On/Off button, there is still a risk of electric shock and fire, for

example, if the device or the connecting cables are damaged or in the event of improper

use.
When working on the device or if the device is not used for a long period of time, always

disconnect it fully from the power supply. Shut down the operating system and if you are

using the device in mains operation, pull out the power plug.

«
...
31
32
33
34
35
...
»

Содержание SIMATIC Field PG M6

























































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC Field PG M6

Бренд: Yamaha Страницы: 83

SuperServer SYS-E102-9AP-LN4-C

Бренд: Supermicro Страницы: 81

NORA-W10 Series

Бренд: Ublox Страницы: 22

xPico Wi-Fi Series

Бренд: Lantronix Страницы: 29

Бренд: ECS Страницы: 60

Бренд: Alinx Страницы: 29

Бренд: MSI Страницы: 445

Бренд: Fujitsu Страницы: 27

Бренд: Fujitsu Страницы: 34

Бренд: Fujitsu Страницы: 24

Бренд: Fujitsu Страницы: 26

Бренд: Fujitsu Страницы: 36

Бренд: Fujitsu Страницы: 24

Бренд: Fujitsu Страницы: 26

Бренд: Fujitsu Страницы: 31

Бренд: Fujitsu Страницы: 45

Бренд: Fujitsu Страницы: 38

Бренд: Fujitsu Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды