Siemens SIMATIC ET 200eco PN, Руководство по эксплуатации

Страница: 197 / 278

Units Output range 0 to
10 V
Output range 0 to
20 mA
Decimal Hexadecimal
Range
10 V 20 mA 27648 6C00
H
7.5 V 15 mA 20736 5100
H
361.7 μV 723.4 nA 1 0001
H
0 V 0 mA 0 0000
H
Nominal range
-1 FFFF
H
0.00 V 0.00 mA -32768 8000
H
Underflow
10.3 Influence of the range of values
Influence of analog signal on input value
The response of the I/O devices with analog inputs depends on the position of the input
values within the range of values. The table below shows this dependency.
The measured value lies Result SF LED Diagnostics data range
of device Interrupt
Within the nominal range Measured value ‑ ‑ ‑
Within the overrange/underrange Measured value ‑ ‑ ‑
Within the overflow 7FFF
H
On Entry
1
Diagnostic interrupt
1
Within the underflow 8000
H
On Entry
1
Diagnostic interrupt
1
Before parameter assignment 7FFF
H
- - -
Within an incorrect parameter assign­
ment
2
Measured value On Entry Diagnostic interrupt
Within an incorrect initial parameter
assignment 7FFF
H
On Entry Diagnostic interrupt
1
If the the group diagnostics and measuring range parameters are enabled for the input device.
2
If a channel was previously parameterized correctly, it continues running with the last parameters.
Influence of output value on analog output
The response of I/O devices with analog outputs depends on the position of the input values
within the range of values. The table below shows this dependency.
The output value lies Result SF LED Diagnostics data range
of device Interrupt
Within the nominal range Value from the IO
Controller ‑ ‑ ‑
Within the overrange/underrange Value from the IO
Controller ‑ ‑ ‑
Within the overflow 0 signal - - -
Within the underflow 0 signal - - -
198
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
I/O device analog input/analog output
10.3 Influence of the range of values