Siemens SIMATIC ET 200AL, Системное руководство

Страница: 199 / 2255

Technical specifications
9.2 Electromagnetic compatibility
IO-Link I/O modules
56
System Manual, 08/2021, A5E48755395-AB
9.2 Electromagnetic compatibility
Definition
Electromagnetic compatibility is the ability of an electrical apparatus to function in a
satisfactory manner in its electromagnetic environment without affecting this environment.
The ET 200AL IO-Link I/O modules fulfill the requirements of the EMC law of the European
Single Market. The prerequisite for this is that the ET 200AL IO-Link I/O modules comply with
the requirements and guidelines regarding the electrical configuration.
Pulse-shaped disturbance variables
The following table shows the electromagnetic compatibility of the ET 200AL IO-Link I/O
modules with respect to pulse-shaped disturbance variables.
Table 9- 1 Pulse-shaped disturbance variables
Pulse-shaped disturbance variable Tested with Conforms to degree of
severity
Electrostatic discharge according to
IEC 61000-4-2.
Air discharge: ±8 kV 3
Contact discharge: ±4 kV 2
Burst pulses (rapid transient disturbance
values) according to IEC 61000-4-4.
±2 kV (power supply cable) 3
±1 kV (signal line <30 m) 3
Sinusoidal disturbance variables
The tables below show the electromagnetic compatibility of the ET 200AL IO-Link I/O
modules with respect to sinusoidal disturbance variables.
Table 9- 2 RF radiation
RF radiation according to IEC 61000-4-3
Electromagnetic RF field, amplitude modulated
Conforms to degree of
severity
80 ... 1000 MHz 10 V/m 3
1.4 ... 6 GHz 3 V/m 2
80% AM (1 kHz)
Table 9- 3 RF coupling (signal and supply cables)
RF coupling according to IEC 61000-4-6. Conforms to degree of
severity
0.15 ... 80 MHz
3
10 V
rms
unmodulated
80% AM (1 kHz)
150
Ω source impedance