Hand-held Controller
SIMATIC - EM 300 Motor Starters
GWA-4NEB 640070302-05
4-3
4.2
Operation
Connection
Connect the hand-held controller as follows:
Switchover to continuous mode
The hand-held controller is available in "jogging mode". However, it can also be
set to "continuous mode". To do this, proceed as follows:
"Continuous mode" is maintained as long as the hand-held controller on the on
the motor starter is connected to 24 V DC. "Jogging mode" is reestablished as
soon as you remove the hand-held controller.
Removing the hand-held controller
If you remove the hand-held controller from the motor starter,
• actuation via the PROFIBUS-DP remains blocked if
"
local
"
mode is set on the
hand-held controller,
• a motor in operation is switched off again if
"
local
"
mode is set on the hand-
held controller,
•
"
Jogging mode
"
is set on the hand-held controller again.
Motor starter with braking contact
On motor starters with a braking contact, the brake is automatically controlled
with the right or left button.
Step
Procedure
1
Open the transparent cover of the compact starter.
2
Connect the cable of the hand-held controller to the Sub-D socket.
Step
Procedure
1
Switch to "remote" mode on the connected hand-held controller.
2
Keep both the left and right button pressed for approximately 5 s.
3
Release the buttons as soon as the LED remote starts to flash.
Содержание SIMATIC EM 300
