Siemens SIMATIC Box PC 840, Руководство пользователя

Страница: 165 / 212

Reinstallation of the Software
9-3
SIMATIC Rack PC 840 Manual
A5E00104826-03
Creating an Extended Partition
In order to create an extended partition, you have to first boot from the
Windows Me Recovery CD as described in steps 1 to 4 above.
Using ”A:\>FDisk” start the Microsoft Windows Me hard disk configuration
program.
In the dialog box for large disk support select “[Y]” for Yes when prompted “Do you
wish to enable large disk support (Y/N)...?”.
Create an extended DOS partition for the rest of the disk space, assign a logical
drive and format it.
9.1.2 Creating Partitions under Windows 2000
After installing a new hard disk it is necessary to create partitions when the
partitions have errors or need to be changed.
Caution
By deleting or creating partitions or logical DOS hard drives all saved data is lost
on the hard disk. All drives on the hard disk will be erased.
The hard disk is delivered with the following installed:
– a partition with the FAT32 file system ,
– a partition with NTFS file system.
To restore the partition to its delivery state, proceed as follows:
Primary Partition, FAT32 File System
1. Boot from the Recovery CD and press ESC when the BIOS message
Press <F2> to enter Setup
appears. After initialization, select the boot options in the boot menu.
2. Select ”ATAPI CD-ROM Drive”.
3. Select ”2. Boot for FDISK, FORMAT or Windows 98 Setup” in the ”Microsoft
Windows Startup Menu” screen form.
4. Start the Microsoft Windows hard disk configuration program with ”A:\>FDisk”.
In the screen form select “Do you wish to enable large disk support (Y/N)...?
[ Y ]” for Yes to support data media with large memory capacity.
5. Create a primary DOS partition with 4090 MB. Enter [N] for “No” for the
question ”Do you want to use the maximum memory size available for the
primary DOS partition and do you want to activate this partition?” and set the
partition size to 6100 MB.