manualshive.com logo in svg

Siemens SIMATIC Box PC 820, Руководство пользователя

Поделиться
Скачать
Siemens SIMATIC Box PC 820 Скачать руководство пользователя страница 159

7-7

Box PC 820 / PC FI45 V2, Manual
A5E00051531-03

7.6

Installation under Windows NT

Install the driver from the CD Documentation and Drivers supplied. Proceed as
described in Chapter 7.2.

Enter the installation path in the setup program and select Typical. In the Touch-
screen setup-dialog window, select Serial, SmartSet 2xx0, Com2, English.

Calibrating the Touch Screen

The touch screen must be calibrated after installation. To calibrate the screen,
proceed as follows:

S

Go to the Control Panel via  Start > Settings

S

Double-click the Elo Touchscreen button to activate the touch screen control
window.

S

Click the Calibrate button. Then touch each of the three targets that appear on
the screen as precisely as possible with a suitable object made of wood or
plastic, such as the blunt end of a pen or pencil.

S

Confirm with “Yes” and “OK” to conclude the calibration procedure.

Removing the Mouse Pointer

In order to remove the mouse pointer, you have to replace it with the Null-Cursor-
File Null.cur, which is included in the EloTouch package. Install the Null-Cursor-
File as follows:

S

Go to the Control Panel via  Start > Settings

S

Double-click on Mouse

S

Select the tab Pointer

S

Select the line Normal Selection

S

Click on Browse...

S

Enter C:\WinNT\Cursors\

 in the File name box

S

Select the file Null.cur

S

Confirm with OK

S

Close the property sheet Mouse Properities with OK.

After doing this, the normal mouse pointer will no longer appear, although all other
pointers will function as before.

Tips for Touch Screen Applications

The same conditions described for Windows 95 also apply here (see Section 7.5).

Touch Screen (Optional with PC FI45 V2)

Siemens Distributor

StockCheck.com

Содержание SIMATIC Box PC 820





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды