Siemens SIMATIC Box PC 627, Руководство по эксплуатации

Страница: 113 / 200

Technical Data
14.3 AC voltage supply
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
14-5
14.3
14.3
AC voltage supply
Technical data
Degree of protection IP20 (in installed state)
Protection class VDE 0106
Note
The power supply contains an active PFC (Power Factor Correction) circuit to conform to the
EMC guidelines.
Uninterruptible AC power systems (UPS) must supply a sinusoidal output voltage in the
normal and buffered mode when used with SIMATIC PCs with an active PFC.
UPS characteristics are described and classified in the standards EN 50091-3 and IEC
62040-3. Devices with sinusoidal output voltage in the normal and buffered mode are
identified with the classification “VFI-SS-....” or “VI-SS-....”.
Output voltages
Voltage Max. current
+ 12 V 6,5 A peak 8 A
- 12 V 0,3 A
+ 5 V 16.5 A
1)
Peak 18.5 A
+ 3.3 V 8.5 A
1)
1)
The max. permitted accumulated power of the +5 V and + 3.3 V is 90 W.
Power Good Signal of the AC power supply