Siemens SIMATIC BATCH, Руководство по эксплуатации

Страница: 747 / 1158

additional information can include, for example the product name, batch name, start of the
batch, completion of the batch or information about the user who performed the archiving.
In addition to the creation of a new SQL server database if one does not yet exist, this method
also requires the specification of "Logon" and "Password" in the "User credentials" folder for
logon to the SQL server. If a user uses a domain for access, the domain must also be entered.
Procedure
1. Select the "SQL server" option.
2. If the network already contains an SQL server database, you can either enter the name
directly in the text box or select the required SQL server name from the available entries
in the drop-down list.
Note that for this technique, you require your own SQL server instance.
3. Click the "Create" button to create a new SQL server database. The "Create SQL Server
Database" dialog opens. Click "Help" button in this dialog to view additional information
about this dialog. Administrator rights on the SQL server and in SIMATIC BATCH are
required for this.
4. In the "User credentials" folder, specify a user that is a member of the Windows user group
"SIMATIC BATCH".
5. Click on the "Test" button to test the connection.
6. Close the dialog.
The following is checked in a connection test:
● Has a value been entered in the "SQL Server" text box?
● Can the specified SQL server be accessed?
● Is there a database with the specified name? This name is derived from the internal name
of the SIMATIC BATCH project.
● Is there a table with the name "tblBatches" in the database?
● Can the "tblBatches" table be written to?
If one of these tests fails, a message is displayed and the dialog cannot be closed with the
current information. Correct the settings and run the test again or cancel it.
"FTP server" method
In addition to a fully configured FTP server, this method requires you to enter the "Login:" and
"Password" in the "User credentials" folder and the connection to be used (default: port 21).
The domain only needs to be entered if the username in the FTP server configuration is derived
from a domain user (default for IIS (Internet Information Server) FTP servers).
The logon to be used here, with or without the domain, depends on the configuration of the
FTP servers. If the access is configured for logon from a domain, for example, XX001\User1,
a domain must also be specified for SIMATIC BATCH. If the access to the FTP server is only
configured for a local logon, the "Domain" text box can remain empty in the "User credentials"
folder. This is equivalent to the name of the PC on which the FTP server is running. With this
method, an existing logon that is only locally available on the PC with the FTP server can also
be used.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
747