Siemens SIMATIC BATCH, Руководство по эксплуатации

Страница: 372 / 1158

Using the overview window
The enlarged area is shaded in the overview window.
Note
The shaded area is released for moving only when objects are enlarged so much in the control
recipe view that they are cut off in the window.
If you click the shaded area, the area can be shifted to the point in the control recipe that you
are interested in. In so doing, the content is updated immediately in the control recipe window.
In this way you navigate easily to the required place, without changing the zoom factor again.
The shifted area is simultaneously displayed in the control recipe view.
9.6.4 Processing status of the batches
9.6.4.1 Status of the batches
Status of the batches
The status of a batch provides you with information about the batch processing. Example: Is
the batch completed or has it been aborted? The status symbols are updated dynamically.
The symbols indicating the batch status are shown in the order folder of the tree structure and
in the batch lists (Planning, Status and Result) in the BATCH Control Center. The table below
shows you which status symbols can be displayed in which batch lists.
Symbol Status Meaning Planning list Status list Results list
Planned The batch was created as a new batch
in batch planning
X
Release prepared While releasing the batch, an error oc‐
curred in communication between
BatchCC and the BATCH server
(Batch control server).
X
Released The batch has been created and re‐
leased. A control recipe exists.
X X
Locked The batch has been created and re‐
leased but was locked by batch control
to prevent it being started.
X X
Canceled The batch was canceled. Further pro‐
cessing is no longer possible.
X
Waiting The batch was started and is now wait‐
ing for the unit or units required at the
start of the recipe to become free.
X
Running The batch was started or resumed and
is being processed.
X
BATCH Control Center
9.6 Batch Planning
SIMATIC BATCH V8.2
372
Operating Manual, 02/2016, A5E35958174-AA