Siemens SICHARGE D 8EM5907-0AA00-1AA7.01 Скачать руководство пользователя страница 99

Страница: 99 / 107

SICHARGE D

Operating Instructions, 02/2021, 8EM5907-0AA00-1AA7.01

Disposal

Environmental protection and the preservation of resources are of high priority for our

company goals. Global environmental management according to ISO 14001 ensures

adherence to laws and sets high standards for this. Environmentally friendly design, technical

safety and health protection are solid targets even during the development of our products.

The charging station is ROHS-compliant. Below, please find the recommendations for

environmentally friendly disposal of the charging station and its components.

Disposing of packaging material

•

Dispose of packaging material in an environmentally friendly manner or recycle the

material. Observe the disposal regulations and environmental protection regulations.

•

If needed, contact a specialist disposal company.

•

Wooden packaging for sea and air transport consists of impregnated wood. Observe the

local regulations.

•

The foil of the sealed packaging is an aluminum compound foil. The foil can be thermally

recycled. Soiled foils must be disposed of via waste incineration.

Disposing of the charging station

For environmentally sound recycling and disposal of the device, contact a certified electronic

waste disposal company. Dispose of the device in accordance with the applicable regulations

in your country. Do not allow coolant for the charging cable to escape into the environment.

Discard the injection molded parts to plastic recycling.

Содержание SICHARGE D 8EM5907-0AA00-1AA7.01












































































































Результаты поиска

Содержание SICHARGE D 8EM5907-0AA00-1AA7.01

Отзывы:

Похожие инструкции для SICHARGE D 8EM5907-0AA00-1AA7.01

Бренды по названию

Популярные бренды

Siemens SICHARGE D 8EM5907-0AA00-1AA7.01, Руководство по эксплуатации

Результаты поиска

Содержание SICHARGE D 8EM5907-0AA00-1AA7.01

Отзывы:

Похожие инструкции для SICHARGE D 8EM5907-0AA00-1AA7.01

Бренды по названию

Популярные бренды