manualshive.com logo in svg

Siemens SICAM Q100, Руководство по эксплуатации устройства, Страница: 9 / 376

Поделиться
Скачать
Siemens SICAM Q100 Скачать руководство пользователя страница 9

 

 

9

SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018

Open Source Software

The product contains, among other things, Open Source Software developed by third parties. The Open 
Source Software used in the product and the license agreements concerning this software can be found in the 
Readme_OSS.

These Open Source Software files are protected by copyright. Your compliance with those license conditions 
will entitle you to use the Open Source Software as foreseen in the relevant license. In the event of conflicts 
between Siemens license conditions and the Open Source Software license conditions, the Open Source Soft-
ware conditions shall prevail with respect to the Open Source Software portions of the software.

The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software License 
Conditions provide for it you can order the source code of the Open Source Software from your Siemens sales 
contact - against payment of the shipping and handling charges - for a period of at least 3 years since purchase 
of the Product. We are liable for the Product including the Open Source Software contained in it pursuant to 
the license conditions applicable to the Product. Any liability for the Open Source Software beyond the program 
flow intended for the Product is explicitly excluded. Furthermore any liability for defects resulting from modifi-
cations to the Open Source Software by you or third parties is excluded. We do not provide any technical sup-
port for the Product if it has been modified.

NOTE

To read the Readme_OSS file, a PDF viewer must be installed on the computer.

Содержание SICAM Q100

























































































































































































































































































































































































Отзывы:

Нет отзывов