Siemens SICAM Q100, Руководство по эксплуатации устройства, Страница: 191 / 376

8 Operation at Use of a PC
8.3 Configuration of the Device
191 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
✧ If you do not want to make any additional settings, continue with the
Activation
of the device configuration
according to section
Activating the Set of Parameters
. If you want to change other settings, enter the
changes and then enable the device configuration as described in section
Activating the Set of
Parameters
.
Download SNMP Device MIB File
✧
Select
yes
in the
Enable SNMP
option (see figure 8-54).
✧
In the
Communication Ethernet
input/output window, click
Download SNMP device MIB file
.
Figure 8-57 File Download Dialog Box
✧
Click
Save
.
The
Save As
dialog opens (see figure 8-12) and you can save the SICAM Q.mib file in any folder and use
it in a MIB browser.
✧
After the parameterization click
Send
.
After clicking
Send
, the parameters are transmitted to the device but not enabled yet (passive set of
parameters).
✧
If you do not want to make any additional settings, continue with the
Activation
of the device configuration
according to section
Activating the Set of Parameters
. If you want to change other settings, enter the
changes and then enable the device configuration as described in section
Activating the Set of
Parameters
.
NOTE
The SNMP protocol is implemented in SICAM Q100 in order to be able to retrieve manufacturer-specific
information.
To retrieve information via SNMP, a MIB browser and the SICAM Q.mib file are required. The MIB browser
allows the displaying of SNMP information objects and their content.