Siemens SICAM P37 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 56

Siemens SICAM P37 Скачать руководство пользователя страница 8

Overview
1.1 Introduction

SICAM P37, 3-phase Harmonic Power Meter, User Manual

E50417-H8940-C563-

, Release Date

8

1.1

Introduction

SICAM P37 3-phase harmonic power meter integrates measurement, record, power metering, remote
communication and control, large screen LCD and network communication functions. It is designed for
measuring power grid parameters such as voltage, current, power, power factor and frequency and active and
reactive energy. With 2

nd

to 50

th

harmonic analysis function, it is capable of calculating various electric energy

quality parameters and metering active and reactive electric energy. RS485 communication supports
MODBUS-RTU. Binary input and output functions are provided.

This product is extensively applicable to power substation and distribution automation system, industrial control
and industrial automation system, energy management system and community power monitoring, etc.

This 3-phase electronic multi-function power meter meets following standards:

• IEC 62052-11:2003 (Electricity metering equipment (a.c.) General requirements, tests and test conditions-

Part 11: Metering equipment) standard

• IEC 62053-22:2003 static meters for active energy (classes 0.2 S and 0.5 S)

• IEC 62053-23:2003 static meters for reactive energy (classes 2 and 3)

• Modbus-RTU

1.2

Features

This project uses high-precision sampling and metering unit and high-speed MCU data processing unit, sup-
porting high-precision, wide-range and accurate measurement and quick data analysis; segmented multi-line
WVA LCD, realizing various and abundant display; white backlight for LCD, satisfying the need for viewing data
in dark environment; NVRAM, supporting long-time data storage without data loss even in the event of power
failure; RS485 communication port and industrial standard communication protocols, realizing flexible and con-
venient networking; and different communication modules, satisfying different interface need of different users.

■

«
...
6
7
8
9
10
...
»

Содержание SICAM P37

























































Отзывы:

Нет отзывов