manualshive.com logo in svg

Siemens SICAM 7KG85X, Руководство пользователя, Страница: 245 / 281

Поделиться
Скачать
Siemens SICAM 7KG85X Скачать руководство пользователя страница 245

Maintenance, Storage, and Transport

Maintenance

Except for a battery replacement, the device is maintenance-free.
Wipe the device using a clean, dry and soft cloth if necessary. Do not use solvents.
The battery change is described in chapter 

9.2 Unpacking, Inspecting the Delivery, Installing, and Changing

the Battery

.

Storage

Store the device in a dry and clean location. Store the device within a temperature range from -40 °C to +70 °C
(-40 °F to +158 °F).
The relative humidity must not lead to condensation or ice formation.
To avoid premature aging of the electrolytic capacitors, store the device within the recommended tempera-
ture range of +10 °C to +35 °C (+50 °F to +95 °F).
Siemens furthermore recommends connecting the device to supply voltage once a year for 1 to 2 days in
order to form the inserted electrolytic capacitors. This procedure should also be carried out before operating
the device.

i

i

NOTE

In this context, follow the commissioning notes in chapter 

9 Commissioning and First Steps

.

Transport

If devices are to be shipped elsewhere, you can reuse the transport packaging. When using different pack-
aging, you must ensure that the transport requirements according to ISO 2248 are adhered to. The storage
packing of the individual devices is not adequate for transport purposes.
The Lithium batteries used in Siemens devices are subject to the Special Provision 188 of the UN Recommen-
dations on the Transport of Dangerous Goods Model Regulations and Special Provision A45 of the IATA
Dangerous Goods Regulation and the ICAO Technical Instructions. This is only valid for the original battery or
original spare batteries.

11.1

Maintenance, Storage, Transport
11.1 Maintenance, Storage, and Transport

244

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Содержание SICAM 7KG85X


























































































































































































































































































Отзывы:

Нет отзывов