manualshive.com logo in svg

Siemens SENTRON PAC5100, Руководство по эксплуатации устройства, Страница: 216 / 266

Поделиться
Скачать
Siemens SENTRON PAC5100 Скачать руководство пользователя страница 216

10 Maintenance, Storage, Transport

10.1 Maintenance

216

SENTRON PAC5100/5200, 7KM5212/5412, Device Manual

E50417-H1040-C568-A1, Edition 03.2015

10.1

Maintenance

Except for a battery replacement, the SENTRON PAC5100/5200 is maintenance-free.

Wipe the device using a clean, dry and soft cloth if necessary. Do not use solvents.

The operating instruction enclosed with the device describes how to replace the battery.

10.2

Storage

Store the device in a dry and clean location. Store the device within a temperature range from -40 °C to +70 °C 
(-40 °F to +158 °F). 

The relative humidity must not lead to condensation or ice formation. 

To avoid premature aging of the electrolytic capacitors, store the device within the recommended temperature 
range of +10 °C to +35 °C (+50 °F to +95 °F). 

Siemens furthermore recommends connecting the device to supply voltage once a year for 1 to 2 days in order 
to form the inserted electrolytic capacitors. This procedure should also be carried out before operating the de-
vice.

The Lithium batteries used in Siemens devices are subject to Special Provision 188 of the UN Recommenda-
tions on the Transport of Dangerous Goods Model Regulations and Special Provision A45 of the IATA Danger-
ous Goods Regulation and the ICAO Technical Instructions. This is only valid for the original battery or original 
spare batteries.

10.3

Transport

For reshipment, Siemens recommends using the original transport packaging of the devices. If you use another 
packaging, make sure that the packaging meets the requirements concerning the stress during transport ac-
cording to the requirements of standard ISO 2248. The storage packing of the individual devices is not ade-
quate for transport purposes.

The Lithium-batteries in our equipment are subject to Special Provision 188 of the UN Recommendations on 
the Transport of Dangerous Goods Model Regulations and Special Provision A45 of the IATA Dangerous 
Goods Regulation and the ICAO Technical Instructions. This is only valid for the original battery or original 
spare batteries.

NOTE

In this context, pay attention to the commissioning notes in chapter 5.7.

Содержание SENTRON PAC5100











































































































































































































































































Отзывы:

Нет отзывов