Siemens SENTRON PAC4200 Скачать руководство пользователя страница 45

Страница: 45 / 252

Description

3.11 Slots for expansion modules

SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01

MDI-X auto crossover describes the ability of the interface to autonomously detect the send

and receive lines of the connected device and adjust to them. This prevents malfunctions

resulting from mismatching send and receive wires. Both crossed and uncrossed cables can

be used.

3.11

Slots for expansion modules

Interface

SENTRON PAC4200 has two slots (MOD1 and MOD2) for installing optionally available

expansion modules.
Please consult the current catalogs to find out which modules are available for

SENTRON PAC4200.
One expansion module can be operated alone on the device or two expansion modules

simultaneously.
Two communication modules cannot be simultaneously operated, e.g. SENTRON

PAC PROFIBUS DP and SENTRON PAC RS485.

DIC

DI0

DI1

DOC

DO0

DO1

(1)

MOD1 slot

(2)

MOD2 slot

Figure 3-17 SENTRON PAC4200, rear

CAUTION

Avoid contamination of the contact areas below the labels "MOD1" and "MOD2", since

otherwise the expansion modules cannot be connected or can even be damaged. Insertion

of metal pins or wires into the contact openings can result in device failure.

Содержание SENTRON PAC4200





























































































































































































































































Результаты поиска

Содержание SENTRON PAC4200

Отзывы:

Siemens SENTRON PAC4200, Руководство пользователя, Страница: 45 / 252

Результаты поиска

Содержание SENTRON PAC4200

Отзывы: