Siemens SENTRON PAC4200 Скачать руководство пользователя страница 120

Страница: 120 / 252

Parameterizing

9.2 Parameterizing the operator interface

SENTRON PAC4200

120

Manual, 09/2008, A5E02316180B-01

●

Date/time
Time-related settings

●

Integrated I/Os
Settings for using the digital inputs and outputs.

●

Communication
Network communication settings.

●

Display
Settings for the display

●

Advanced
Password protection, limit values, universal counter, battery change, device reset.

●

External modules
Settings for expansion modules operated with SENTRON PAC4200.

9.2.2

Device information

The device information cannot be modified. Key F4

returns to the "SETTINGS" menu.

Call: "SETTINGS > DEVICE INFORMATION"

DEVICE INFORMATION

SIEMENS AG

Manufacturer designation.

Order number of the device.

S/N:

Serial number of the device.

D/T:

Date code.

HW-REV:

Hardware revision level.

SW-REV:

Firmware revision level.

BL-REV:

Boot loader revision level.

Содержание SENTRON PAC4200





























































































































































































































































Результаты поиска

Содержание SENTRON PAC4200

Отзывы:

Siemens SENTRON PAC4200, Руководство пользователя, Страница: 120 / 252

Результаты поиска

Содержание SENTRON PAC4200

Отзывы: