Siemens SENTRON PAC3120 Скачать руководство пользователя страница 114

Страница: 114 / 160

Appendix
A.1 Modbus

112

PAC3120 and PAC3220

Equipment Manual, 10/2019,

L1V30425208F-01

A.1.2

Exception codes

Overview

Table A- 2

Modbus exception codes

Exception codes

Name

Meaning

Remedy

Illegal Function

Illegal function:

•

The function code in the request is not a

permissible action for the slave.

•

The slave is in a status in which it cannot

process a request of this type. This is the

case, for example, if it has not yet been con-

figured and is requested to return register

values.

Check which function

codes are supported.

Illegal Data Address

Illegal data address:
This address is not permissible for the slave.

This is the case, for example, if the combination

of start offset and transfer length is invalid.

Check the offset and

the number of regis-

ters.

Illegal Data Value

Illegal data value:
The request contains a data value that is not

permissible for the slave. This indicates an error

in the remaining structure of a complex request,

e.g. an incorrect data length.

Check that the speci-

fied offset and the

specified data length in

the command are

correct.

Slave Device Failure

Error in processing the data:
An indefinite error occurred when the slave

attempted to execute the requested action.

Check that the speci-

fied offset and the

specified data length in

the command are

correct.

Write Protection ON

The action has been rejected because the write

protection is set.

Deactivate the write

protection.

Содержание SENTRON PAC3120

































































































































































Результаты поиска

Содержание SENTRON PAC3120

Отзывы:

Siemens SENTRON PAC3120, Руководство пользователя, Страница: 114 / 160

Результаты поиска

Содержание SENTRON PAC3120

Отзывы: