Siemens SENTRON PAC3120 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 160

Siemens SENTRON PAC3120 Скачать руководство пользователя страница 11

Introduction

1.5 Security information

PAC3120 and PAC3220
Equipment Manual, 10/2019,

L1V30425208F-01

9

information during the period required by the applicable OSS licenses by contacting the

following address:
Siemens AG

Smart Infrastructure

Low Voltage Products

Technical Support

Postfach 10 09 53

93009 Regensburg

Germany
www.siemens.com/lowvoltage/support-request

https://support.industry.siemens.com/cs/us/en/ps

Keyword: Open Source Request (please specify Product name and version, if applicable)
SIEMENS may charge a handling fee of up to 5 EUR to fulfil the request.
Warranty regarding further use of the Open Source Software
SIEMENS' warranty obligations are set forth in your agreement with SIEMENS. SIEMENS

does not provide any warranty or technical support for this Product or any OSS components

contained in it if they are modified or used in any manner not specified by SIEMENS. The

license conditions may contain disclaimers that apply between you and the respective

licensor. For the avoidance of doubt, SIEMENS does not make any warranty commitment on

behalf of or binding upon any third-party licensor. The Open Source Software used in the

product and the license agreements concerning this software can be found in the

Readme_OSS.

1.5

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the Internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.
For additional information on industrial security measures that may be implemented, please

visit (

https://www.siemens.com/industrialsecurity

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customer's exposure

to cyber threats.
To keep up to date with all the latest product updates, subscribe to the Siemens Industrial

Security RSS Feed at (

https://www.siemens.com/industrialsecurity

«
...
9
10
11
12
13
...
»

Содержание SENTRON PAC3120

































































































































































Отзывы:

Нет отзывов