Siemens SENTRON PAC3100 Скачать руководство пользователя страница 31

Страница: 31 / 152

SENTRON PAC3100
Manual, 07/2009, A5E02385159B-01

Mounting

5.1

Unpacking

Observe the ESD Guidelines. Open the packaging carefully. Do not use excessive force.

Check the packaging

Carry out the following checks after receipt of the device and before installation:
●

Ensure the packaging is undamaged

●

Make sure that the contents of the package are complete

●

Check the device for external damage

Please contact your Siemens sales partner in the following cases:
●

The packaging is damaged

●

The contents of the package are not complete

●

The device is damaged

WARNING

Damaged devices may result in death, serious injury, or property damage
Do not install or start up damaged devices.

Storage

Store the SENTRON PAC3100 in dry conditions.

NOTICE

Avoid condensation
Sudden fluctuations in temperature can lead to condensation. Condensation can affect the

function of the device. Store the device in the operating room for at least 2 hours before

commencing installation.

Содержание SENTRON PAC3100

























































































































































Результаты поиска

Содержание SENTRON PAC3100

Отзывы:

Siemens SENTRON PAC3100, Руководство пользователя, Страница: 31 / 152

Результаты поиска

Содержание SENTRON PAC3100

Отзывы: