Siemens SENTRON ATC6500, Руководство пользователя

Страница: 202 / 256

MODBUS communication
10.4 Data library
3KC ATC6500 transfer control device
200
Manual, 05/2019, L1V30538268002A-01
③
Key press simulation
The following values must be sent to the address 2F0AH in order to simulate the
corresponding key press:
Bit Meaning
0 ▲ key
1 Key MAN
2 ► key
3 << key
4 Key TEST
5 AUT key
6 Key OFF
7 OPEN key
8 >> key
9 ▼ key
10 ✓ key
11 ◄ key
12 CLOSE key
④
Execution of the Commands menu
The following values between 0 and 15 must be sent to the address 2FF0H in order to
execute the corresponding command:
Bit Meaning
0 Reset maintenance 1
1 Reset maintenance 2
2 Reset maintenance operations 1
3 Reset maintenance operations 2
4 Reset counter CNTx
5 Reset status limit threshold LIMx
6 Reset hours counter Source 1
7 Reset hours counter Source 2
8 Reset hours counter Breaker 1
9 Reset hours counter Breaker 2
10 Reset breaker operation
11 Reset event log
12 Restore default parameters
13 Save parameters in backup memory
14 Reload parameters from backup memory
15 Forced changeover I / O
16 Reset A03 - A04 alarms
17 Simulates priority source failure