Siemens SENTRON ATC6500, Руководство пользователя

Страница: 170 / 256

Parameterization
9.4 Parameters
3KC ATC6500 transfer control device
168
Manual, 05/2019, L1V30538268002A-01
9.4.6 P06 - Source Lines
This menu is divided into 2 sections for Source 1 (SRC1; SRC1 = Source 1) and Source 2
(SRC2).
P06
Qn, n = 1…2)
Designation on ATC
display
Description Unit Default Range
P06.n.01 SOURCE
DESCRIPTION
Description of source
- This parameter enables the user to de-
fine any name for the sources.
This name then appears on the Overview
display page.
Qn (char*6)
P06.n.02 PRIORITY Priority source
- This parameter defines priority of the
source. If both sources should be availa-
ble, the source with priority 1 is regarded
as the priority source. If both sources
should have the same priority, Source 1 is
prioritized.
n 1/2
P06.n.03 SOURCE TYPE Type of source
- This parameter defines whether the con-
nected source is a generator or a network.
The corresponding diagram is then shown
on the Overview display page.
Network Network
Generator
P06.n.04 COOLING TIME Generator cooling time
– Maximum duration of the cooling cycle.
Time that elapses between the disconnec-
tion of load from the generator and the
engine actually stopping.
Note: If P06.n.03 is set to generator.
sec 120 1-3600