Siemens SENTRON 5TT7 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 64

Siemens SENTRON 5TT7 Скачать руководство пользователя страница 43

Module

2.6 Advanced settings

I/O operating hours counter

The I/O operating hours counter registers the total time during which the respective I/O is in

the HIGH state. You can activate the counter for every digital input or output. The value can

then be appended to the periodical message and "rall" (see chapter "Overview of SMS

commands" (Page 49)).
The counters have a maximum value of 17,500 hours.

Note
When configuring the counters, make sure that all of the module's IOs are in the LO state, as

otherwise time recording errors may arise.

Querying the operating hours counter of a digital output

To query the counter of a single digital output, send the "timedon" SMS to the module, where

n is the number of the output.
The module responds with "Don ON for x,xx hours".
Send the "timedo0" SMS to the module to query the counters of all digital outputs. The

module responds with "Do1 was ON for x,xx hours, Do2 was ON for x,xx hours … Do4 was

ON for x,xx hours".

Resetting the operating hours counter of a digital output

To reset the counter of a single digital output, send the "clrtimedon" SMS to the module,

where n is the number of the output.
The module responds with "erasing counter Don".
You can reset the counters of all digital outputs by sending the "clrtimedo0" SMS to the

module. The module responds with "erasing counter Do1, erasing counter Do2… erasing

counter Do4".

Querying the operating hours counter of a digital input

To query the counter of a single digital input, send the "timedin" SMS to the module, where n

is the number of the input.
The module responds with "Din ON for x,xx hours".
You can query the counters of all digital inputs by sending the "timedi0" SMS to the module.
The module responds with "Di1 was ON for x,xx hours, Di2 was ON for x,xx hours … Di4

was ON for x,xx hours".

GSM alarm module
System Manual, 06/2014, 2541304131-01

43

«
...
41
42
43
44
45
...
»

Содержание SENTRON 5TT7

































































Отзывы:

Нет отзывов