Siemens SENTRON 5TT7 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 64

Siemens SENTRON 5TT7 Скачать руководство пользователя страница 28

Module

2.5 Configuring

2.5.4.2

Digital outputs

Configuration

The GSM alarm module has four outputs with changeover contact. The following objects can

be configured/activated on the associated tabs:

●

Name (this name must be unique and cannot be used with any other input or output. The

defaults are DO1 to DO4.)

●

After a digital output has been switched, the module sends a confirmation message

followed by the new status of the output ("auto message"). This message is sent only to

the sender of the settings.

●

If you activate "Send only user defined text", the module only sends the text defined in the

message box (no module name, IO name or timestamp).

●

Defining your own commands for controlling the outputs (On instruction, Off instruction,

one-shot instruction).

●

Activating switching (changeover) of the output (response to RING) when the module is

addressed by a telephone call.

●

Linking DO with DI

●

Switching on when there is no connection to the GSM network

●

Retaining the status on restart

GSM alarm module

28

System Manual, 06/2014, 2541304131-01

«
...
26
27
28
29
30
...
»

Содержание SENTRON 5TT7

































































Отзывы:

Нет отзывов