Siemens Sentron 3VA Скачать руководство пользователя

Страница: 291 / 492

Accessories

4.5 Manual operators

3VA molded case circuit breakers with UL and IEC certification
Manual, 01/2019, L1V30435333-01

289

4.5.6.3

Testing the tripping mechanism

The <PUSH TO TRIP> button can be used to check whether the tripping mechanism is

working properly.

Procedure

Turn the Max-Flex handle to the OFF (O) position.

Open the panel door.

Keep the interlock pin pressed as described above.

Bring the molded case circuit breaker to the ON (I) position using the handle.

Press the <PUSH TO TRIP> button with a tool such as a screwdriver.

The Max-Flex operator moves from the ON (I) position to the TRIP position. The molded

case circuit breaker is now in the tripped state.

Move the handle for resetting the molded case circuit breaker to the OFF (O) position.

Close the panel door.

The molded case circuit breaker can now be closed again.

4.5.6.4

Auxiliary switches for the operator kit with Bowden cable

For the operator kit with Bowden cable, auxiliary switches are available with one or two

changeover contacts. These are screwed to the switching mechanism and signal the

switching state.

Содержание Sentron 3VA













































































































































































































































































































































































































































































































Результаты поиска

Содержание Sentron 3VA

Отзывы:

Похожие инструкции для Sentron 3VA

Бренды по названию

Популярные бренды

Siemens Sentron 3VA, Руководство пользователя

Результаты поиска

Содержание Sentron 3VA

Отзывы:

Похожие инструкции для Sentron 3VA

Бренды по названию

Популярные бренды