Siemens Sentron 3VA страница 280 Скачать руководство пользователя

Страница: 280 / 492

Accessories

4.5 Manual operators

3VA molded case circuit breakers with UL and IEC certification

278

Manual, 01/2019, L1V30435333-01

4.5.4.7

Locking, blocking and interlocking

The following accessories for locking, blocking and interlocking are used:

●

Locking at the handle

●

Locking at the masking plate of the panel door

●

Locking, blocking and interlocking at the rotary operator

Locking at the handle

The rotary operator can be locked at the handle with up to three padlocks with a diameter of

3/16" to 5/16" / 5 mm to 8 mm. Padlocks are not included in the scope of supply.

Lockable positions:

●

Position OFF (O)

Locking the door mounted rotary operator in OFF (O) position prevents the molded case

circuit breaker from being switched on and the panel door from being opened. The door

interlock cannot be overridden.

●

Position ON (I)

Possible only if the front mounted rotary operator has been modified according to the

operating instructions.

Note
No impairment of protection function
Locking the rotary operators in the ON (I) position does not impair the protection function of

the molded case circuit breakers. In the event of a fault, the molded case circuit breaker trips

in the normal way.
When the rotary operator is unlocked, the position changes to TRIP.

Содержание Sentron 3VA













































































































































































































































































































































































































































































































Результаты поиска

Содержание Sentron 3VA

Отзывы:

Похожие инструкции для Sentron 3VA

Бренды по названию

Популярные бренды

Siemens Sentron 3VA, Руководство пользователя

Результаты поиска

Содержание Sentron 3VA

Отзывы:

Похожие инструкции для Sentron 3VA

Бренды по названию

Популярные бренды