NL Basic settings
B
Basic settings
asis settings
B
You can set up your device according to your needs.
asis settings
Overview of the basic settings
The basic settings depend on the equipment of your appliance.
Basic setting
Display text
Choise
Description
Water hardness
H04
1
H00 - H07
Set the water softener to the water
hardness.
At position H00, the water
softening is switched off.
rinse aid
lilac
r05
1
r00 - r06
Set the amount of rinse aid.
Switch off the rinse aid
with position r00.
Intensive drying
d00
1
d00 - d01
When rinsing, the temperature is
increased, which results in better
drying results. As a result, the run
time may increase slightly.
Remark: Not suitable for
delicate items of crockery.
Switch on intensive drying "d01"
or switch off "d00".
hot water
A00
1
A00 - A01
Set cold water connection or hot
water connection. Only set the device
to Hot water if the hot water is
prepared in an energetically
favorable manner and a suitable
installation is available, eg a solar
boiler with circulation pipe. The water
temperature must be a minimum of
40 °C and a maximum of 60 °C.
Switch on hot water "A01" or switch
off "A00".
Factory setting
re
YES
Reset changed settings
to the factory state.
The settings for the first
start-up must be specified.
1
Factory setting (may differ depending on the device type)
34