Siemens SCALANCE XR324-4M EEC Скачать руководство пользователя страница 23

Страница: 23 / 84

4.4

LED display

The "RM" LED for the "redundancy manager" function

The "RM" LED indicates whether or not the device is operating in the role of redundancy

manager and whether or not the ring is operating error-free.

LED color

LED status

Meaning

off

The device is not operating in the role of "redundancy manager".

green

The device is operating in the role of redundancy manager. The ring

is working without problems, monitoring is activated.

green

flashes

The device is operating in the role of redundancy manager. An in‐

terruption has been detected on the ring and the device has switched

through.

The "SB" LED for the standby function

This LED shows the status of the standby function.

LED color

LED status

Meaning

off

The standby function is disabled.

green

The standby function is enabled. The standby section is passive.

green

flashes

The standby function is enabled. The standby section is active.

The "F" LED for the fault status

The "F" LED (fault) provides information on the error/fault status of the device. While the device

is starting up, this LED has the following meaning:

LED color

LED status

Meaning during the device startup

off

Device startup completed successfully.

red

Device startup not yet completed or a fault/error has occurred.

red

flashes

Bad firmware image.

During normal operation, the "F" LED provides the following information:

LED color

LED status

Meaning during operation

off

No operating problems.

red

The device has detected an error. The signaling contact opens.

Device description

4.4 LED display

SCALANCE XR-300M EEC

Compact Operating Instructions, 11/2019, A5E02661176-14

Содержание SCALANCE XR324-4M EEC





















































































Результаты поиска

Содержание SCALANCE XR324-4M EEC

Отзывы:

Похожие инструкции для SCALANCE XR324-4M EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE XR324-4M EEC, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE XR324-4M EEC

Отзывы:

Похожие инструкции для SCALANCE XR324-4M EEC

Бренды по названию

Популярные бренды