manualshive.com logo in svg

Siemens SCALANCE XR-300M PoE Series, Краткое руководство по эксплуатации

Поделиться
Скачать
Siemens SCALANCE XR-300M PoE Series Скачать руководство пользователя страница 33

Installation and disassembly

5

5.1

Safety notices for installation

Safety notices

When installing the device, keep to the safety notices listed below.

WARNING

If a device is operated in an ambient temperature of more than 50 °C, the temperature of the 
device housing may be higher than 70 °C. The device must therefore be installed so that it is 
only accessible to service personnel or users that are aware of the reason for restricted access 
and the required safety measures at an ambient temperature higher than 50 °C.

WARNING

If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to the 
ambient temperature of the device.

WARNING

Cable

If the cable or conduit entry point exceeds 70 °C or the branching point of conductors exceeds 
80 °C, special precautions must be taken. If the equipment is operated in an air ambient in 
excess of 50 °C, only use cables with admitted maximum operating temperature of at least 80 
°C.

NOTICE
Improper mounting

Improper mounting may damage the device or impair its operation.
• Before mounting the device, always ensure that there is no visible damage to the device.
• Mount the device using suitable tools. Observe the information in the respective section 

about mounting.

SCALANCE XR-300M PoE
Compact Operating Instructions, 03/2022, A5E02661178-15

33

Содержание SCALANCE XR-300M PoE Series





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды